Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.!
Questions?
We are here to help.
Cold Rolled Silicon Transformer Steel
Electrical steel mainly consists of grain-oriented electrical steel and non-oriented electrical steel. Grain-oriented electrical steel widely used in transformer industry. Non-oriented electrical steel widely used in motor industry.
Due to moderate carbon content and good comprehensive properties, the strength, plasticity, welding and other properties are well matched, which is the most widely used. SS400 steel plate is applicable to bridges, ships and vehicles.SS400 is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel and other section steel, medium thick steel plate. It is widely used in buildings and engineering structures. It is used for making steel bars or building workshop frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used as mechanical parts with low performance requirements; C. Grade D steel can also be used as some professional steel.
Transformer Grain Cold Rolled Non Grain Oriented Silicon Steel
We can offer different sizes silicon steel sheet and we can offer you different shapes as core and sheet. It is widely used in shielding installation area because its cheaper price.
Cold Rolled Grain Oriented Silicon Steel
Application：Widely used in transformers, generators, various household motors and micro-motors, etc.
ultra-thin non-oriented and grain oriented electrical steel sheet
ultra-thin non-oriented and grain oriented electrical steel sheet for transformer core silicon steel coilElectrical steel, also known as silicon steel, is a ferrosilicon soft magnetic alloy steel with very low carbon content, usually containing 0.5% to 4.5% silicon. The addition of silicon can increase the resistivity and maximum permeability of iron, and reduce the coercivity, iron loss and magnetic aging.
Electrical transformer grain oriented silicon steel
Grain-oriented silicon steel (Fe-Si steel; transformer steel; electrical steel) is a soft magnetic polycrystalline metallic alloy that is used as core material in electrical transformer cores and electrical motors.
Silicon steel EI lamination 2 3/8 EI 180 transformer EI core
Grain-oriented silicon steel (Fe-Si steel; transformer steel; electrical steel) is a soft magnetic polycrystalline metallic alloy that is used as core material in electrical transformer cores and electrical motors.
Oriented silicon steel
Thickness: 0.18mm, 0.20mm or as required
Width: 1200/1250 or as required
Length: As required
Standard: AISI,ASTM,DIN,JIS,GB,JIS,etc.
INCOLOY Alloy 825 Stainless steel coil
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Q195 galvanized coil is a surface galvanized coil with yield strength of 195MPa.
Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.
Questions?
We are here to help.
Copyright ©
